Self-aligning ball bearings

      Self-aligning ball bearings have two types of structures: cylindrical hole and conical hole. The characteristic is that the outer ring raceway is spherical and has automatic self-aligning. error, but the relative inclination of the inner and outer rings should not exceed 3 degrees. Self-aligning ball bearings are bearings with spherical balls between the inner ring of two raceways and the outer ring with spherical raceways. The center of curvature of the surface is consistent with the center of the bearing, so it has the same self-aligning function as the self-aligning ball bearing. When the shaft and housing are deflected, they can be adjusted automatically without increasing the bearing burden.

      Spherical roller bearings can withstand radial loads and axial loads in two directions. Large radial load capacity, suitable for heavy loads and impact loads, bearings with a tapered bore in the inner ring can be installed directly. Or install it on the cylindrical shaft using an adapter sleeve and a dismantling sleeve. The cages use steel stamping cages, polyamide forming cages and copper alloy turning cages.

      The self-aligning ball bearing has two structures of cylindrical hole and conical hole, and the material of the cage is steel plate, synthetic resin, etc. Its characteristic is that the outer ring raceway is spherical, with automatic centering, which can compensate for the errors caused by non-concentricity and shaft deflection, but the relative inclination of the inner and outer rings should not exceed 3 degrees.

      Self-aligning ball bearings are suitable for industries such as heavy loads and shock loads, precision instruments, low-noise motors, automobiles, motorcycles, metallurgy, rolling mills, mining, petroleum, paper, cement, sugar, and general machinery.